|
Brownie's Tankfill
Marine Basic Systems
Light Duty
(Small
boat owners, diving individuals or couples)
Designed
and built specifically to withstand the marine environment - all
components and hardware are impervious to water/weather spray. Many
of the same quality components of our Yacht Pro series, but without
the automation features.
Please
note: Accumulating condensate must be manually drained from the
system every 15 minutes (minimum) and at the end of the filling
process. The operator must shut off power to the system when the
target fill pressure is reached in the tanks.
Single tank fill assembly consisting of Kevlar reinforced hose with
non-corroding stainless steel ends, stainless pressure gauge, flow
control valve, tank fitting with bleed valve.
Model |
MB25S-U |
MB35S-U |
FAD |
3.0
CFM
85 LPM |
3.9
CFM
110 LPM
|
Fill
Time*
(minutes) |
28 |
22 |
Motor
Type
HP / kw |
ODP
2 hp / 1.5 kw |
ODP
3 hp / 2.5 kw |
Genset
(minimum) |
5.0
kw |
7.5
kw |
Dimensions
L - D - H |
23
- 14 - 18 in
584-355-457 mm |
23
- 14 - 18 in
584-355-457 mm |
Weight |
82
lbs
37 kg |
85
lbs
39 kg |
Duty
Cycle
(maximum) |
2
hr |
2
hr |
Max
Pressure |
5000
psi
345 bar |
5000
psi
345 bar |
Filtration
Capacity** |
3,200
cu ft
90,600 liters |
3,200
cu ft
90,600 liters |
* Based
on recharging a single 80 cu ft. tank from 500 to 3000 PSIG.
** Air Processing Capacity based on standard inlet conditions, 68
degrees F at 1 ATA, and relative humidity of 36%. Results will vary
due to condition variations.
Note: Marine Basic 25 and 35 are designed for filling SCUBA or SCBA
bottles. It is neither designed nor intended for filling cascade
storage systems of any kind.
|
